Inicio > 

GWS-461  Tobogán de Agua Gigante de 43 pies de altura

GWS-461 Tobogán de Agua Gigante de 43 pies de altura
  • GWS-461 Tobogán de Agua Gigante de 43 pies de altura
  • GWS-461 Tobogán de Agua Gigante de 43 pies de altura
  • GWS-461 Tobogán de Agua Gigante de 43 pies de altura
  • GWS-461 Tobogán de Agua Gigante de 43 pies de altura
GWS-461
Tobogán de Agua Gigante de 43 pies de altura
Tamaño (metro)
32mLx11mWx13mH
Tamaño (pie)
105ftLx36ftWx43ftH

GWS-461 giant commercial inflatable water slide

The GWS-461 is listed as a 43 ft high giant water slide. Compare this model against the full site and delivery plan before choosing it for an event or commercial attraction. Its scale makes the operating area, access, handling and model-specific instructions central to the buying decision.

Catalogue dimensions

ModelGWS-461
Listed length x width x overall height32 x 11 x 13 m
Listed dimensions in feet105 x 36 x 43 ft

The dimensions above match the product data and describe the overall unit. They do not establish platform height, rider capacity or the complete operating footprint. Request the drawing of the configuration being offered and the additional space needed for access, landing, anchoring, blowers and staff.

Check the site before requesting a delivery date

  • Available space: usable ground area, overhead clearance and routes for unloading and moving the packed equipment.
  • Operating plan: intended rider group and the supplier's permitted-use limits for this exact configuration.
  • Services: electrical supply, blower requirements, water connections and drainage arrangements specified for the model.
  • Handling: packed dimensions, weight, unloading method and the crew or equipment required.
  • Documentation: instructions, applicable test documents and the scope of any certification for the supplied version.

Do not assume that the catalogue's overall height or width establishes suitability for every age group or allows multiple riders at once. Ask the supplier to state the permitted operation in writing.

Compare model and delivery scope

Review other models in the commercial slip-and-slide catalogue and the standard inflatable water slide range. Match the operating layout and landing arrangement to your project rather than comparing height alone.

Use the inflatable RFQ checklist to distinguish equipment, accessories, artwork, packing, transport and any installation services. Request separate confirmation of availability, production if needed, and delivery timing. Written warranty and maintenance terms should form part of the offer.

Request a GWS-461 quotation

Send model GWS-461, quantity, destination and desired delivery date, together with a site plan and intended use. Include custom colours, graphics or accessory requirements. Request the GWS-461 drawing and complete supply quotation.

  • Grado comercial de 15-18 oz de vinilo de la más alta calidad, retardante de fuego y libre de plomo.
  • Bafles internos y malla de seguridad con protector de dedos de 1000D de máxima resistencia.
  • Costuras dobles en todo el inflable, con costuras cuádruples y hasta 6 filas de costuras en áreas clave dentro de la base del inflable.
  • Refuerzos adicionales en todos los puntos de tensión y paneles interiores, más de 100 refuerzos en inflables de tamaño mediano.
  • Forro desmontable en el tobogán para protegerlo y prolongar su vida útil al reducir el desgaste.
  • Velcro impermeable en el forro desmontable de la piscina. Velcro impermeable y cintas en todas nuestras unidades.
  • Impresión digital de alta definición con tintas ecológicas. Capa protectora antiarañazos en todos nuestros materiales de impresión.
  • Drenaje con cremallera y solapa de protección para secar rápidamente el tobogán acuático.
  • Costuras selladas en las unidades acuáticas para evitar que el agua entre en el interior.
  • Los anclajes están fabricados con materiales de aleación, moldeados, no soldados, y nunca se oxidan.
  • Somos el primer fabricante de inflables en utilizar una máquina de corte automático completa. La máquina realiza el corte del material y la costura de forma absolutamente recta, lo que nos permite completar productos inflables de alta calidad, precisos y hermosos en menos tiempo.
  • Nuestros inflables están certificados para cumplir con los estándares CE, EN71, EN14960, ASTM e ISO, y también cumplen con los estándares canadienses TSSA y australianos AS3533.4.1-2005.
  • Materiales Lona de PVC recubierta comercial de 15-18 oz.
    Certificación CE, EN14960, ISO, ASTM y cumple con el estándar australiano.
    Detalles del embalaje Caja para el inflador, bolsa de PVC para los inflables.
    Garantía 2 años
    Forma de envío Marítimo, Aéreo, Exprés

    PRODUCTOS RELACIONADOS

    Get Quote WhatsApp